Used to degas the mobile phase for HPLC and can be employed in other applications where gases may interfere with the use of the system (such as an autotitrator).
- High efficiency in-line system
- Reliable, continuous operation
- Quick equilibration and short startup times
- Removes dissolved gases from solvents
General
Mode of degassing: Gas permeation through a fuoropolymer tube
Degassing capacity: ~2 ppm at 1 ml/min
Dead volume: ~480 µl per channel for standard channel
Power
Power requirement if using supplied AC adapter: 100 to 240 VAC (±10%), 1 A, 50 to 60 Hz (±3 Hz)
Power requirement if not using supplied AC adapter: 15 to 24 VDC at 0,85 A maximum (0,5 A typical)
Wall sockets: 4 supplied with AC adapter, interchangeable: North America/Japan, U.K., Continental Europe, Australia
Installation over-voltage category: II
Validation output
Signal: 5 mVDC / 1 mm Hg absolute from 20 to 800 mm Hg (0,100 VDC at 20 mm Hg; 4000 VDC at 800 mm Hg)
Accuracy: ±1,0% of reading ±0,010 VDC from 20 to 800 mm Hg
Operating conditions
Ambient relative humidity (RH): 20 to 80% RH (without condensation)
Altitude: 0 to 2000 m
Indoor vs. outdoor use: Indoor
Pollution degree: 2
Storage conditions
Ambient temperature: −20 to +60 °C
Ambient relative humidity: 20 to 80% RH (without condensation)
Altitude: 0 to 12000 m